srp100a thru srp100k vishay general semiconductor document number: 88743 revision: 08-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 fast switching plastic rectifier features ? fast switching for high efficiency ? low forward voltage drop ? low leakage current ? high forward surge capability ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in fast switching re ctification of power supply, inverters, converters and freewheeling diodes for consumer and telecommunication. (note: these devices are not q101 qualified.) mechanical data case: do-204al, molded epoxy body epoxy meets ul-94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 50 v to 800 v i fsm 30 a t rr 100 ns, 200 ns i r 10 a v f 1.3 v t j max. 125 c do-204al (do-41) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol srp100a srp100b srp100d srp100g srp100j srp100k unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 v maximum rms voltage v rms 35 70 140 280 420 560 v maximum dc blocking voltage v dc 50 100 200 400 600 800 v maximum average forward rectified current 0.375" (9.5 mm) lead length at t a = 55 c i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a operating junction temperature range t j - 50 to + 125 c storage temperature range t stg - 50 to + 150 c
srp100a thru srp100k vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88743 revision: 08-apr-08 2 note: (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, p.c.b. mounted ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol srp100a srp100b srp100d srp100g srp100j srp100k unit maximum instantaneous forward voltage 1.0 a v f 1.3 v maximum dc reverse current at rated dc blocking voltage t a = 25 c t a = 100 c i r 10 200 a maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 100 200 ns typical junction capacitance 4.0 v, 1 mhz c j 12 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol srp100a srp100b srp100d srp100g srp100j srp100k unit typical thermal resistance (1) r ja 41 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode srp100j-e3/54 0.33 54 5500 13" diameter paper tape and reel srp100j-e3/73 0.33 73 3000 ammo pack packaging figure 1. forward current derating curves am b ient temperat u re (c) a v erage for w ard rectified c u rrent (a) 0 20 40 60 8 0 100 120 140 0 0.25 0.5 0.75 1.0 1.25 0.375" (9.5 mm) lead length capaciti v e load 5.0 10 20 = i (pk) i (a v ) = i (pk) i (a v ) figure 2. maximum non-repetitive peak forward surge current for w ard s u rge c u rrent (a) pk (half sine- w a v e) 1 10 100 5 10 15 20 25 30 nu m b er of cycles at 60 hz t a = 75 c 8 .3 ms single half sine- w a v e 1.0 cycle
srp100a thru srp100k vishay general semiconductor document number: 88743 revision: 08-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 0.4 0.6 1.0 1.2 1.4 1.6 2.0 0.01 0.1 1 10 100 1. 8 0. 8 t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle percent of rated peak re v erse v oltage (%) 20 60 8 0 100 0.01 1 10 100 0 40 0.1 instantaneo u s re v erse c u rrent ( a) t j = 100 c t j = 25 c figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0.1 1 10 100 1 10 100 re v erse v oltage ( v ) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p j u nction capacitance (pf) 0.01 0.1 1 10 100 0.1 1 10 100 t - p u lse d u ration (s) typical thermal impedance (c/ w ) do-204al (do-41) 1.0 (25.4) mi n . 1.0 (25.4) mi n . 0.205 (5.2) 0.160 (4.1) 0.107 (2.7) 0.0 8 0 (2.0) dia. 0.034 (0. 8 6) 0.02 8 (0.71) dia.
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
